With the winter season almost finished, numerous motorcycle riders are searching for some useful tips to prepare their favorite bikes for spring. It will be a huge mistake to jump on your motorcycle and try to take it out for a ride without performing an overall inspection at first. The cold winter months may have affected the functionality of your motorcycle in numerous ways, so a proper inspection is mandatory before you can even consider starting the riding season. From your tires and wheels, to all the liquids and lights of your motorcycle, you will need to analyze every component in the smallest detail.
The first components that you will have to inspect are the tires and wheels. Make sure that the tires are properly inflated and include the necessary pressure for a safe ride. Moreover, see if you can find any cracks, bulges or treads within the structure of the tires and fix these problems immediately. After the long, cold winter months, the levers and pedals of your motorcycle may have lost the lubricating liquid, so you will need to complete the liquid and adjust the pedals and levers properly. Moreover, make sure that neither of them is broken, bent or cracked.
The next components that you will need to inspect are the cables. If you find a frayed, kinked or folded cable, make sure you take the necessary steps to correct it. When you begin riding your motorcycle, the cables should not affect your riding by any means. Analyze the instructional manual before you begin the installation of the batter, in case you have removed it during the winter period. The battery should be charged and the terminals should be free any kind of impurities or dirt. The lights are also very important and should be carefully analyzed before begin the riding session.
Check the headlamp, reflectors and taillights of your motorcycle and see if they include any cracks or if they are properly installed. Press the brake pedal to see if the brake lights are functioning properly and do not forget to test the tail lamp as well. If they are covered with mud, dust or any other type of impurities, clean them properly until they are entirely visible. Move the motorcycle a few meters away from its storage place and see if you find any leaks on the ground.
Like automobiles, motorcycles require various liquids and fluids in order to function properly, so you will need to check out the hypoid gear oil, engine oil, hydraulic fluid and the fuel. Start by replacing any damaged oil, and then complete all the liquids with the necessary additions. Check the chassis for traces of rust. If you discover some areas that are affected by rust, you will need to clean them up with the necessary solutions. Once you get on the road, try not to push your motorcycle to the extremes. Always drive defensively and listen for any strange noises that might indicate a particular problem in the engine or chassis.